Round Material Diameter: Φ20mm—Φ120mm
Square Material Size: □20mm—80mm
Cutting Length: ≥5mm
Material Head Length: ≥5mm
Tail End Scrap Length: 75mm + less than cutting length
Finished Length Tolerance: ±0.05/100mm
Finished Verticality Tolerance: 0.1/100mm
Cutting Surface Roughness: ≤6.3μm
2) Saw Blade Specifications
Number of Teeth: Determined by material specifications
Outer Diameter * Blade Thickness: Φ380mm*2.6mm
3) Saw Blade Spindle
Spindle Precision: ≤0.01mm
Saw Rotation Speed: 42-151 rpm (variable frequency speed control)
Feeding Method: Oblique Cutting
Feeding Drive Method: Servo Motor + Ball Screw
4) Main Clamping Method
Clamping Method: Horizontal, Oblique Clamping
5) Feeding Method
Clamping Method: Horizontal Clamping
Feeding Drive Method: Servo Motor + Ball Screw
Single Feeding Length: Up to 750mm, multiple cyclic feedings possible
6) Motor Usage
Main Spindle Motor: AC 15kW
Hydraulic Motor: AC 2.2kW
Chip Removal Motor: AC 0.2kW
Feeding Motor: AC 1.5kW Servo Motor
Feeding Motor: AC 1.5kW Servo Motor
Damper Cooling Fan: AC 38W 220V
Lubrication Oil Pump: AC 25W 220V
7) Hydraulic System
Hydraulic System Pressure: 7MPa
Hydraulic Oil Tank Volume: 65L (46# Anti-wear Hydraulic Oil)
8) Pneumatic System
Pneumatic Pressure: 0.4-0.7MPa
9) Cooling System
Cooling Method: Oil Mist Spray Cooling
10) Lubrication System
Lubrication Method: Fully Automatic Centralized Lubrication
11) Chip Removal System
Chip Removal Method: Fully Automatic Chain Plate Chip Conveyor
12) Machine + Material Rack Dimensions (L*W*H)
7100mm*3050mm*2000mm
(Refer to "Section Nine: Layout Diagram")
13) Machine + Material Rack Weight
3950kg (3300+650)
Main Component Origin
Gearbox bearings: | SKF (Sweden) |
Lead screw bearings: | NSK (Japan) |
Main motor: | TECO (Taiwan)/Baide (Siemens)/Detong |
Frequency converter: | Mitsubishi (Japan) |
Servo motor: | Mitsubishi (Japan) |
Servo driver: | Mitsubishi (Japan) |
PLC: | Mitsubishi (Japan) |
Touch screen: | Mitsubishi (Japan) |
Low-voltage accessories: | Schneider (France) |
Linear guide: | Topking (Taiwan) |
Lead screw | HIWIN (Taiwan) |
Pneumatic solenoid valve: | AirTAC (Taiwan) |
Air pressure sensor: | SMC (Japan) |
Main motor belt (narrow V-belt): | MITSUBOSHI (Japan) |
Limit switch, photoelectric switches, proximity switches: | Omron (Japan) |